blow moulding machine

Adopt the new type double bend arm and four pull rod-clamping structure :cross direction;middle mould board is move parallel;the distance between two mold board is adjusted by the chain wheel. Thus,the clamping forceis very strong.The machine frame is produce by the whole complete casting bottom,so that the machine are firm and running stable.Adopt the straight slide way,reduce the friction and lend then the life of the machine.Double start working button,which is designed for avoiding the injury.Power saving design that can increase your profitsThe single Dirction of pre-form placing and bottle picking,which increase the output.Segregate type air controlling system,which is designed for avoiding waste pollutionThe stretching air cylinder is adjusted parallel from front to back,from left to right freely by regulator.

Specification:

GL-81

Theoretial output 

2000pcs/hr 1000pcs/hr

Heating capacity

15kw

Max bottle volume

2.0L(2 cavity) 4.0L(1cavity)

Blowing pressure 

≤3.5mpa

Motion pressure

≤1.0mpa

Max diameter ×height

140×H340MM

Mould thickness

120-220mm

Weight

1500kg

Main machine(L×W×H) 

1700×600×1700mm×2

Heater(L×W×H)

2000×650×1450mm